Bendix-commercial-vehicle-systems ASA-5 TEMPLATE User Manual download pdf

Bendix

ASA-5

Slack

Adjuster Template

1. Block the wheels, mechanically cage the parking brakes and drain

all air pressure from the system.

2. Before installing the ASA-5

slack adjuster, read the installation

instructions packaged with the service replacement ASA-5

slack

adjuster, or the service data sheet SD-05-1269.

3. Remove the existing slack adjuster and yoke.

4. Install the ASA-5

slack adjuster on the brake camshaft.

5. Center the hole “A” on the brake camshaft.

6. Center the ASA-5

slack adjuster yoke pin in the template hole.

7. The full diameter of the ASA-5

slack adjuster link pin must be with-

in the appropriate slot in the template (6˝ yoke pin to 6˝ link pin,

etc.). If not aligned, adjust the yoke adapter on the actuator rod.

HOLE

}

6˝

5.5˝

5˝

{

6˝

5.5˝

5˝

This template is not needed for the ASA-5

slack adjuster installation. Please refer to the installation

instructions included with your product. This template can be used for assistance, if needed.

Please print this template at 100% on cardstock for assistance with the installation of your ASA-5

slack adjuster.

1 2

Adjuster Template 1

Summary of Contents

Page 1 - Adjuster Template

Bendix®ASA-5®SlackAdjuster Template1. Block the wheels, mechanically cage the parking brakes and drainall air pressure from the system.2. Before insta

Page 2

Bendix®ASA-5®SlackAdjuster Template1. Block the wheels, mechanically cage the parking brakes and drainall air pressure from the system.2. Before insta

Comments to this Manuals

No comments

Bendix-commercial-vehicle-systems ASA-5 TEMPLATE User Manual

Browse online or download User Manual for Equipment Bendix-commercial-vehicle-systems ASA-5 TEMPLATE. Bendix Commercial Vehicle Systems ASA-5 TEMPLATE User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Bendix-commercial-vehicle-systems ASA-5 TEMPLATE